1-1
INTRODUCTION
www.maxcessintl.com
MAGPOWR TS Load Cell
MI 850A342 1 A
About these
operating
instructions
All of the information herein is the exclusive proprietary property
of Maxcess International, and is disclosed with the
understanding that it will be retained in confidence and will
neither be duplicated nor copied in whole or in part nor be used
for any purpose other than for which disclosed.
Copyright 2011, all rights reserved.
Periodically there will be updates to this manual. The latest
version is available at
www.magpowr.com
or by calling
800.MAGPOWR (800.624.7697) or 405.755.1600.
These load cell devices must not be installed or used in a
machine or system which does not comply with the machinery
directive 2006/42/EC.
These load cell devices were designed and manufactured to be
installed as Partly Completed Machinery into a machine or partly
completed machine.
The instructions must be read and used by all persons who have
the responsibility of installing and maintaining these load cell
devices.
These instructions must be retained and incorporated in the
technical documentation for the machine or partly completed
machinery into which the load cell device is installed.
CE marking
Only the 2006/42/EC Machinery directive applies to these
devices and they are not marked with the CE sign.
Electromagnetic Compatibility (EMC)
The load cell device is inherently benign in terms of
electromagnetic compatibility and the EMC directive has not
been applied. The electromagnetic compatibility of the load cell
device can only be assessed in connection with the entire
electrical installation including the control. The machine builder
who installs this partly completed machinery into a machine is
responsible for compliance with the EMC directive.
Language
These are the original instructions, written in English.
