Maxcess FIFE DSE-23, Руководство по эксплуатации, Страница: 17 / 22

MAINTENANCE 5 - 1
DSE-23 www.maxcess.eu MI 1092 1
Wa
rtu
ng.fm
5 MAINTENANCE
WARNING:
Danger of injury by crushing.

Maintenance work must only be performed on the sensor
when the power is turned off and the machine is stopped and
protected against being turned on again.
Maintenance
The protectors should be cleaned of ambient dust and dirt at
regular intervals using a neutral synthetic cleaning agent and a
soft cloth. When selecting synthetic cleaning agents, note
chemical resistance.

page
7-1
No additional maintenance tasks are required for the sensor.
Decommissioning
1. Turn off the electrical power to the system.
2. Disconnect the signal cable from the sensor.
only for sensor cables with open wire ends
Personnel: Qualified electrician

The sensor may only be disconnected electrically by a
qualified electrician.
3. Unscrew the sensor from its bracket.
4. Store the sensor in a cool, clean and dry place.

Ambient conditions, page 7-1
OR
Dispose of the sensor according to your national
requirements.