Maxcess FIFE DSE-23, Руководство по эксплуатации, Страница: 10 / 22

INSTALLATION 3 - 1
DSE-23 www.maxcess.eu MI 1092 1
3 INSTALLATION
Transport and storage
– The sensor and/or the unit on which the sensor is mounted
must be secured against slipping during transport
– The sensor must be stored in a cool, clean, and dry place.

Ambient conditions, page 7-1
– The sensor must not be stored in the vicinity of powerful
magnetic fields. The electronic components of the sensor
may be damaged.
Mounting
WARNING

If a sensor is damaged, it must not be installed or placed in
operation.

All assembly tasks on the sensor must only be performed
when there is no electrical power in the system.

Assembly tasks and mechanical settings must only be
performed when the machine has been stopped and secured
from being turned on again.
Mounting location – Protection Class: IP54
IP64 optional
– Operating temperature: 5°C ... 60°C
– Relative humidity: max. 85%, non-condensing
– Operating altitude above sea level: maximum 5000m
– Protected from vibrations
– Do not place close to strong magnetic fields:
The electronic components may be damaged.
– Do not place close to strong electrostatic fields:
The electronic components may be damaged.
– Not in places where there is a risk of explosions.