P/N 03523301 Rev B Page 1
ChinStraps
User Instructions
CAUTION
Before use, thoroughly read MAXAIR
®
CAPR
®
P/N 03521015 User Instruction (received with all CAPR Helmets
and available at www.maxair-systems.com>SUPPORT>USER INSTRUCTION MANUALS.
!
Warning, Caution, or Note
Order Number Part Number
!
O.N.
PN
WARNING
Failure to follow User Instructions P/N 03521015 and the instructions
contained herein may be hazardous to the user’s health.
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and
understand the User Instructions should use MAXAIR Products.
The institution using this product in any application is responsible
for determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open flame.
Follow current local regulations governing biohazard waste to safely
dispose of single use MAXAIR Products.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
!
Symbol Definitions
Intended Use
The MAXAIR ChinStraps are accessory items for MAXAIR Hard
Hat configurations that enhance Helmet-to-head secureness of fit.
This may be helpful for applications where a worker’s activity or
environmental factors could otherwise dislodge the Hard Hat from its
properly donned position.
MAXAIR ChinStraps may be used with any MAXAIR Hard Hat
System configuration.
Regulatory
NIOSH
ANSI Z87.1
Specifications
Recommended System Temperature Limits
Use/Handling: 0
o
C to 54
0
C at a maximum 80% Relative Humidity.
Charging: 0
o
C to 45
0
C at a maximum 80% Relative Humidity.
Storage: 0
o
C to 35
0
C at a maximum 80% Relative Humidity.
Materials
Nylon Hooks
Acetal Buckle and Keeper
Polypropylene Strap
Polyester Buckle
Typical Hard Hat System Components
1. 2061-04A Hard Hat
2. 2083-03 Helmet (with Liner
and Power Cord)
3. 2167-10 Filter Cartridge
4. 2500-37TSC Li-Ion
Battery (12-15 Hr/Charge)
5. 2000-76 Battery Belt
6. 2600-02 Battery Charger
7. 2264-01 ML & SM DLC
Shroud
8. 2366-02 ML & SM DLC
Disposable Lens Cuff
5
6
1
2
4
3
8
7
O.N. 2000-208
P/N 03531235
2-point
O.N. 2000-210
P/N 03531271
4-point