i-SHWAK V4
Inverter air/water chillers and heat pumps with wall-mounted indoor unit and remote condensing outdoor unit
43
22.2.2
Mod. i-SHWAK V4 10 / 12
E
E
1)
Remove the cover twisting off the screws (number 1; 2; 3; 4; 5; 6; 7; 8).
2)
Twist off the screws (number 9; 10) of the front panel and then push the panel downward to remove the interlocking tab
(Detail A); pull the panel forward to remove it.
3)
Twist off the screws (number 11; 12; 13) and those places on the battery side of the unit. To remove the side panel, pull the
panel forward to remove it (in order to loose the hooking tab on the basement indicated as C in the detail B) and remove it.
22.2.3
Mod. i-SHWAK V4 14 / 14T / 16 / 16T
1)
Remove the cover twisting off the screws (number 1; 2; 3; 4; 5; 6; 7; 8;9).
2)
Twist off the screws (number 10; 11) of the front panel and then push the panel downward to remove the interlocking
tab (Detail A); pull the panel forward to remove it.
3)
Twist off the screw number 12 and those placed of the battery side of the unit. To remove the side panel, pull it upward
(in order to loose the hooking tab on the basement indicated as C in the detail B) and remove it.
23
COMPONENTS OF INDOOR AND OUTDOOR UNITS
Note:
All the pictures in this manual are for explanation purpose only. They may be slightly different from the unit you purchased.
The actual shape shall prevail.
