background image

 

- 24 -

 

 

 

  ERROR CODES 

 

Error codes 

Problem 

Solution 

 

Time card is not inserted far enough to 
where automatic feed activates. 

Insert time card to where automatic feed 
starts. 

 

Time card is inserted on the wrong side. 

Insert time card on the other side. 

 

ER-2500 cannot read holes on time card 
correctly. 

Check if any holes are covered. 

Check if time card is bent or damaged. 

 

 6 printings or 4 printings (In case of 

using Daily Total Hours function) have 
been already completed in a day. 

 Improper print was made by manual 

operation. 

 

 

150, 130 or 50 time cards have been al-
ready inserted in a day/month.   

ER-2500 can handle up to 150, 130 or 50 
time cards a day/month according to set-
ting program. 

 

When setting ER-2500, invalid data is 
input. 

Input correct data. 

 

 

 

Automatic feed does not carry time card 
smoothly. 

Do not hold time card during printing. 

Check if time card is bent or damaged. 

 

Unusable external key is pressed. 

 

 

When setting ER-2500, 

Special day and 

Holiday are set to the same day of the 
week.

 

Input correct data. 

 

Printer malfunction. 

Try to get normal printout by disconnecting 
or connecting the power cord. 

 

 

  CAUTION CODE 

 

Caution Code 

Problem 

Solution 

 

When you try to revise Machine 
Mode, Pay Closing Date, Date, 
LST, or Daily Total Hours, all time 
data is deleted. 

If you press “SET” key

 

All time data is deleted and the 
revised data is registered. 

If you press “CANCEL” key

 

The revision is canceled without 
deleting time data.

 

 

Содержание ER-2500































Отзывы: