1
MAV Sense s.r.o.
Sládkova 372/8
702 00 Ostrava
Czech Republic
info
@
mavsense.com
www
.mavsense.com
IBEX
E
LECTRONIC
S
PEED
C
ONTROLLER
U
SER
M
ANUAL
F
IRMWARE
V
ERSION
1.06
The IBEX product line represents advanced speed controllers for use exclusively in RC airplane models. With
integrated telemetry and various possibilities of optional user configuration, the controllers offer high
efficiency, low weight and precise motor control. The integrated high-power BEC, offering 15Amps of
continuous current, is suitable even for the most demanding applications. The full power of the BEC is available
at any battery voltage within the controller specification (6-51V).
F
EATURES
-
Small dimensions combined with high power motor control.
-
High power BEC offers 15A continuous current (30A max). BEC overcurrent and overtemperature
protection included.
-
BEC voltage setting in 0.1V steps.
-
Over- and undervoltage protection, overtemperature protection, motor-stall protection.
-
Configurable current limiter.
-
Safety shutdown when the throttle impulse is lost.
-
Configurable acceleration, timing, electromagnetic brake etc.
-
Low acoustic noise due to high frequency switching.
-
Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2. Alternative firmware with Spektrum
SRXL2 telemetry support.
-
Telemetry (RC system dependent): voltage, current, power, capacity, temperature, RPM, energy.
-
Telemetry min/max values are logged.
-
Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
-
Firmware updates via USB interface.
-
Languages: CZ/DE/EN/FR/IT.
IBEX-85 SBEC
Dimensions
80x30x13.5mm
Weight incl. cables
81g
Continuous current
80A
*
Peak current
120A/2s
*
Supply voltage
6 – 51V
LiPo cells
2 – 12
LiFe cells
3 – 14
Cables battery/motor
4mm
2
/2.5mm
2
Anti-spark circuit
No
Recommended connectors
G4 (75A), XT90 (90A)
Temperature range
-10÷110°C
PWM frequency
20kHz
Operating current
60mA
Standby current
4mA
Propeller positioning
With additional Hall-sensor
Telemetry
Duplex EX, Multiplex MSB, Graupner Hott,
Futaba S.Bus2, Spektrum SRXL2™
Status LED
Yes
Active freewheeling
Yes
BEC continuous output current
15A
*
BEC peak current
30A/2s
*
BEC voltage setting
5.5 – 8.4V (0.1V steps)
Optical isolation
No
Maximum RPM
> 300 000 eRPM (2-pole motor)
External switch voltage
Approx. 10V
External switch max. current
30mA
*)
Specified values are valid in case sufficient continuous airflow is provided.
