background image

MODEL: BiM6
size:  215mm x 170mm
May 13, 2011

Color: Black

Using the BiM6

Thank you for purchasing the BiM6. Designed to work with your 
iPod/MP3 player or any audio device, this system provides high 
quality audio and that invites your music to come out and play. 
Please read the instructions carefully before operating the unit 
and keep for future reference.

Installing/Replacing Batteries

1.  Push to open the battery compartment door located on the 

bottom of the unit.

2.  Insert 4 “AAA” (R03) batteries (not included), checking that 

the + and – ends of the batteries match the drawing inside 
the battery compartment. We recommend the use of alkaline 
batteries for longer life.

3.  Close the compartment cover.

For Best Performance

•   We recommend the use of alkaline batteries for longer life.
•   Do not mix old and new batteries.
•   Do not mix alkaline, standard (carbon-zinc) or rechargeable 

(nickel-cadmium) batteries.

•   Batteries are to be inserted with correct polarity.
•   Remove exhausted batteries from the unit.
•   Do not attempt to recharge non-rechargeable batteries.
•   Remove the rechargeable batteries from the unit before 

charging.

•   The supply terminals are not to be short-circuited.
•   Batteries should be removed if the item will not be used for 

an extended period of time, such as a month or longer, to 
prevent battery leakage or damage.

•   Rechargeable batteries should only be charged under adult 

supervision.

•   Only batteries of the same or equivalent type recommended 

are to be used.

Listening to an iPod/MP3 player or other audio device

1.  Plug the attached audio patchcord located on the back of 

the unit into the headphone or Line-out Jack on your iPod 
or other audio device. Pull out the cradle at the base of the 
unit and place iPod on it. 

2.  Turn on you r iPod/MP3 player or other audio device, 

press play and set desired volume.

3.  Switch the mode button located on the top of the unit to 

ON.  

4.  Remember to turn unit OFF when not in use to save 

batteries.

NOTE: Connected iPhones create audio interference 

noise when a call is received. Turn on Airplane mode 
to disable phone while playing music.

Limited 90-Day Warranty

iHome Products, a division of SDI Technologies Inc. (hereafter referred to 
as SDI Technologies), warrants this product to be free from defects in 
workmanship and materials, under normal use and conditions, for a period 
of 90 days from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to 
first return it to the store where it was originally purchased. Should this fail 
to resolve the matter and service still be required by reason of any defect 
or malfunction during the warranty period, SDI Technologies will repair or, 
at its discretion, replace this product without charge (except for a $7.00 
charge for handling, packing, return UPS/postage, and insurance). This 
decision is subject to verification of the defect or malfunction upon delivery 
of this product to the Factory Service Center listed below. The product 
must include proof of purchase, including date of purchase. The fee for 
service without proof of purchase is 
$15.00. Before returning this product for service, please first replace the 
batteries (if applicable) with fresh ones, as exhausted or defective batteries 
are the most common cause of problems encountered.
If service is still required:
1.  Remove the batteries (if applicable) and pack the unit in a well padded, 

heavy corrugated box.

2.  Enclose a photocopy of your sales receipt, credit card statement, or 

other proof of the date of purchase, if within the warranty period.

3.  Enclose a check or money order payable to the order of SDI Technologies, 

for the sum of $7.00 ($15.00 without proof of purchase).

4.  Send the unit prepaid and insured, to the Factory Service Center listed 

below.

Consumer Repair Department

SDI Technologies Inc.

1330 Goodyear Drive

El Paso, TX 79936-6420

Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for 
which it was designed. It does not cover (i) products which have been 
damaged by negligence or willful actions, misuse or accident, or which 
have been modified or repaired by unauthorized persons; (ii) cracked or 
broken cabinets, or units damaged by excessive heat; (iii) damage to digital 
media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping 
this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not 
extend to owners of the product other than to the original purchaser. In 
no event will SDI Technologies or any of its affiliates, contractors, resellers, 
their officers, directors, shareholders, members or agents be liable to you 
or any third party for any consequential or incidental damages, any lost 
profits, actual, exemplary or punitive damages. (Some states do not allow 
limitations on implied warranties or exclusion of consequential damages, 
so these restrictions may not apply to you.) This warranty gives you specific 
legal rights, and you may also have other rights which vary from state to 
state.
Your acknowledgement and agreement to fully and completely abide by 
the above mentioned disclaimer of warranty is contractually binding to you 
upon your transfer of currency (money order, cashier's check, or credit 
card) for purchase of your SDI Technologies product.

© 2011 SDI Technologies, Inc. All Rights Reserved.

iHome is a registered trademark of SDI Technologies Inc.

BARBIE and associated trademarks and trade dress are owned by, 

and used under license from, Mattel, Inc. © 2011 Mattel, Inc. 

All Rights Reserved.

Printed in China 

BiM6-05132011-B

Important Message to Consumers

Thank you for purchasing one of the Barbie™ brand’s many top-quality electronic products.  We 
would appreciate it if you take a few moments to read through these instructions.  This will help you 
explain the safe and proper way to use this toy, and to help give it the long-lasting life that Barbie™ 
branded products are designed for.

Keep these instructions for future reference as they contain important information

BiM6

MODEL: BiM6
size:  215mm x 170mm
May 13, 2011

Color: Black

NOTE: ADJUST iPod VOLUME 
TO AVOID DISTORTION

NOTE: THIS UNIT DOES NOT CHARGE iPod

Battery Installation

Play all iPod and MP3 players

off  on

Watch videos

Back Panel

Off/On Switch

Power indicator

Cradle

Audio patch cord

questions?

 

www.ihomeaudio.com

mp3 stereo speaker system

Maintenance

•  Place the unit away from sources of direct sunlight or excessive heat.
•  Protect your furniture when placing your unit on a natural wood and lacquered finish.
•  Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, 

such as Benzine, thinner or similar materials can mar the surface.

Отзывы: