Matsusada DOEF Series, Инструкция по эксплуатации

Страница: 117 / 124

9 Voltage Shift Option
109
DOEF series
Matsusada Precision
9-7 Combined use with Communication Options
Products with the voltage shift option differ from products without the option in the maximum and minimum
units of voltage and current limit protection values, voltage cutoff protection value, DC voltage value, and
each measurement values.
Note that the initial values on the remote control also differ.
Table: Setting unit, minimum/maximum values for each command (Matsusada original command)
Function Command Setting unit Min setting Max setting
No. of
significant digits
DC voltage setting DCVSET(?) 0.01V -115.00V +115.00V 5 digits
Positive voltage limit VULIM (?) 0.1V +5.0V +115.0V 4 digits
Negative voltage limit VLLIM(?) 0.1V -5.0V -115.0V 4 digits
Positive current limit IULIM(?) 0.1A 0.1A
60% to 110% of rating
current
✽
1
4 digits
Negative current limit ILLIM(?) 0.1A 0.1A
60% to 110% of rating
current
✽ 2
4 digits
Voltage cutoff OVPSET(?) 0.1V 0.1V 115.0V 4 digits
Voltage effective value readout VRMSGET 0.01V 5 digits
Voltage DC value readout VDCGET 0.01V 5 digits
Voltage AC value readout VACGET 0.01V 5 digits
Voltage max value readout VMAXGET 0.1V 4 digits
Voltage min value readout VMINGET 0.1V 4 digits
✽
1 t will be determined depending on the positive voltage limit protection value.
✽
2 It will be determined depending on the negative voltage limit protection value.