For your continued safety and to reduce the risk of injury or electric shock, please follow all the
safety precautions listed below.
• Read all the instructions carefully before using the appliance and keep them for future
reference.
• Retain the manual. If you pass the appliance onto a third party make sure to include this
manual.
• Keep ventilation openings, in the appliance enclosure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
• If the mains cable is damaged, it must be replaced by the manufacturer of its service agent or a
similarly qualified person in order to avoid a hazard.
• Choose a location for your WIne Cooler away from heat sources such as radiators or fires as
refrigerant and vesicant are burnable.
• Do not discard old refrigerators at will in order to avoid environment pollution. Thank you for
your cooperation.
• Young children should be supervised to ensure that they do not play with the appliance.
• Do not damage the refrigerant circuit (applicable only for appliances with refrigeration circuits
which are accessible to the user.)
• The appliance must be maneuvered by a minimum of 2 persons.
• This unit is for storing liquids only. Do not store food in this appliance.
• This appliance is not intended for use by persons (including children) with reduced sensory or
mental capabilities, or lack of experience and knowledge unless they have been given
supervision or instructions concerning the use of the appliance by a person responsible for
their safety.
Rated voltage:
230V
Rated frequency:
50Hz
Gross volume:
140L
4.95 (cubic feet)
Weight:
29kg
Product dimension h/w/d: 845 x 504 x 514mm
Sound decibel rating:
40db[A]
Refrigerant:
R600a
Features and Specification are subject to change without prior notice.
SPECIFICATIONS
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
GB - 1
GB - 5
DSG Retail Ltd. Maylands Avenue Hemel Hempstead
Hertfordshire HP2 7TG England
Visit Partmaster.co.uk today for the easiest
way to buy electrical spares and accessories.
With over 1 million spares and accessories available
we can deliver direct to your door the very next day.
Visit www.partmaster.co.uk
Or call
0870 6001 338
(UK customers only)
Calls charged at National Rate.
Safety First!
WARNING
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL
TO CARRY OUT SERVICING OF REPAIRS WHICH INVOLVE THE REMOVAL OF
COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS
YOURSELF.
MAINTENANCE
DISPOSAL
Changing the internal light
1. Before carrying out the bulb replacement always press the
Internal Light switch and the Thermostat Control Dial OFF.
Then, disconnect the mains supply.
2. Undo the screw holding the light bulb cover in place.
3. Remove the plastic light bulb cover.
4. Remove the old bulb by unscrewing in an anti-clockwise direction.
5. Replace with a new bulb (10W SES) making sure that it is secure in the bulb cover.
6. Refit the translucent light cover and re-connect your to the mains supply and switch on.
Old appliances still have some residual value. An environmentally friendly method of disposal will
ensure that valuable raw materials can be recovered and used again. The refrigerant used in your
appliance and insulation materials require special disposal procedures. Ensure that none of the
pipes on the back of the appliance are damaged prior to disposal. Up to date information
concerning options for disposing of your old appliance and packaging from the new one can be
obtained from your local council office.
If your Wine Cooler is fitted with a lock, to prevent children being trapped inside, keep the key out of
reach and not in the vicinity of the appliance.
If disposing of an old Wine Cooler break off any old locks or latches as a safeguard.
GLASS FRONTED
WINE COOLER
INSTRUCTION
MANUAL
M34WC09
PRODUCT OVERVIEW
THERMOSTAT
(at the rear of the Cooler)
INTERNAL LIGHT
LEVELLING FEET
ADJUSTABLE
SHELVES
Moving your Wine Cooler
Care when handling
Hold the Wine Cooler around its sides or base when moving it. Under no circumstances should
it be lifted by holding the edges of the top surface.
Location
Do not locate your Wine Cooler near a heat source, eg. cooker, boiler or radiator. Also avoid
direct sunlight in lean-to’s sun lounges.
Leveling the Wine Cooler
Make sure that the Wine Cooler is level. Use the rotating levelling feet at the front. If the Wine
Cooler is not level, the doors and magnetic seal alignments will be affected.
Do not Turn on the Wine Cooler for 2 Hours
After the Wine Cooler is in place it needs to be left for 2 hours. The coolant fluid needs time to
settle.
Installation
Don’t cover or block the vents or grilles of your appliance.
Servicing
This product should be serviced by an authorised engineer and only genuine spare parts should
be used.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or serious malfunctioning. Contact the
Customer Service Department or a qualified technician.
When the appliance is not in use for a long period of time, disconnect it from the mains supply,
empty all wine and clean the appliance, leaving the door ajar to prevent unpleasant smells.
Congratulations
on the purchase of your new Matsui Wine Cooler. We recommend that
you spent some time to read this Instruction Manual in order to fully understand how to
install and operate it.
GLASS DOOR
Matsui M34WC09_A3_GB_1_090831.pdf 31/8/2009 23:08:40
