Matrox Solios eA, Установка и справочник по оборудованию, Страница: 81 / 196

Matrox Solios eA/XA acquisition section 81
Auxiliary signals
Matrox Solios eA/XA supports multi-purpose auxiliary input and output signals.
Auxiliary signals are configurable signals that can support one or several functions,
one of which is user-defined. The table in the previous subsection identifies the
functions to which an auxiliary signal can be defined. You specify their function
in the DCF file.
Type of signal
Path# Ma
x #
s
ig
na
ls
1
TTL/LVDS dedicated
input/output signals
2
TTL/LVDS aux. input
3
TTL/LVDS aux. output
3
LV
D
S
/T
TL
_A
U
X_
IN
0
LV
D
S
/T
TL
_A
U
X_
IN
1
LV
D
S
/T
TL
_A
U
X_
IN
2
LV
D
S
/T
TL
_A
U
X_
IN
3
LV
D
S
/T
TL
_A
U
X_
IN
4
LV
D
S
/T
TL
_A
U
X_
IN
5
LV
D
S
/T
TL
_A
U
X_
IN
6
LV
D
S
/T
TL
_A
U
X_
IN
7
P0
_L
VD
S/T
TL_
AU
X_
O
U
T0
P0
_L
VD
S/T
TL_
AU
X_
O
U
T1
P1
_L
VD
S/T
TL_
AU
X_
O
U
T0
P1
_L
VD
S/T
TL_
AU
X_
O
U
T1
P2
_L
VD
S/T
TL_
AU
X_
O
U
T0
P2
_L
VD
S/T
TL_
AU
X_
O
U
T1
P3
_L
VD
S/T
TL_
AU
X_
O
U
T0
P3
_L
VD
S/T
TL_
AU
X_
O
U
T1
VSYNC 0 1 in +1 out P0_LVDS_TTL_VSYNC_IO in out
1 1 in + 1 out P1_LVDS_TTL_VSYNC_IO in out
2 1 in + 1 out P2_LVDS_TTL_VSYNC_IO in out
3 1 in + 1 out P3_LVDS_TTL_VSYNC_IO in out
CSYNC or
HSYNC
4
0 1 in + 1 out P0_LVDS/TTL_CHSYNC_IO in out
1 1 in + 1 out P1_LVDS/TTL_CHSYNC_IO in out
2 1 in + 1 out P2_LVDS/TTL_CHSYNC_IO in out
3 1 in + 1 out P3_LVDS/TTL_CHSYNC_IO in out
Clock 0 1 in/out P0_LVDS/TTL_CLK_IO
1 1 in/out P1_LVDS/TTL_CLK_IO
2 1 in/out P2_LVDS/TTL_CLK_IO
3 1 in/out P3_LVDS/TTL_CLK_IO
1. The maximum # for each signal type cannot always be attained. The actual maximum depends on whether the required auxiliary signals are available or have been
defined as another type.
2. In this column, each signal is a dedicated signal (that is, it cannot be redefined as another type of signal). These signals can be accessed from the DVI connectors;
the clock signal can also be accessed from the internal auxiliary I/O connector.
3. On external auxiliary I/O connector 0 (DB-44).
4. The board can accept an HSYNC or CSYNC input signal, but it can only output an HSYNC signal.