Matrox Rapixo CL Pro Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 96

Matrox Rapixo CL Pro Скачать руководство пользователя страница 27

Camera Link cables longer than 7 meters 27

To connect video sources to the Camera Link connectors, use standard Camera
Link cables with a 26-pin high-density male mini Camera Link connector (HDR
or SDR) at one end. When connecting to PoCL-compliant video sources, you
should use PoCL-compliant Camera Link cables (HDR or SDR). Camera Link
cables are not available from Matrox; for possible sources, see the

Connectors on

Matrox Rapixo CL Pro boards

section in

Appendix B: Technical information

.

❖

If using both Camera Link connectors to connect to the same video source
(Medium, Full, 72-bits, or 80-bits configuration), the cables you choose should
be of the same type and length. Note, however, if they are not,
Matrox Rapixo CL Pro will adapt to any delay caused by reasonable differences
in length.

Camera Link cables longer than 7 meters

When using Camera Link cables that are longer than 7 meters with
Matrox Rapixo CL Pro and using a pixel clock of 85 MHz, the resulting images
from your camera might have either salt and pepper noise or unsynchronized lines
(that is, a line is shifted either left or right, and clipped to fit the frame). These
errors might be caused by signal degradation due to long cables.

Test-pattern examples

Shifting

Salt and pepper

Good

Zoom-in of the
highlighted area

«
...
25
26
27
28
29
...
»

Содержание Rapixo CL Pro

































































































Отзывы:

Нет отзывов