Matrox MXO, Инструкция по установке и эксплуатации

Страница: 47 / 64

37
Ensuring accurate printing to tape using Final Cut Pro
Ensuring accurate printing to tape using Final
Cut Pro
In order to perform an accurate print-to-tape using Final Cut Pro with Matrox
MXO, you may need to adjust the
Playback Offset value in the Device Control
Preset Editor .
° To adjust the Playback Offset value:
1
Start Final Cut Pro and choose
Final Cut Pro > Audio/Video Settings
,
and then click the
Device Control Presets
tab.
2
Select the preset for your device, click Edit or Duplicate , and then click OK .
3
You can now adjust the value in the
Playback Offset
box.
¦ Note To avoid having black frames recorded at the end of an insert edit,
make sure that Editing (instead of Mastering ) is selected in the Edit to Tape
window. To do this, choose File > Edit to Tape , and then select Editing from
the pop-up menu at the top of the window.