Matrox Mura MPX-4/0, Руководство пользователя

Страница: 18 / 98

18 Matrox Mura Display Wall – User Guide
Setting the order of your output connectors
Monitors are numbered consecutively based on which
connector each is attached to. For example, on an Mura
MPX Series output card using a quad-monitor cable, the
monitor attached to the connector labeled
1
on the cable is
identified as
1
, the monitor attached to the connector
labeled
2
on the cable is identified as
2
, and so on.
To facilitate the setup of your multi-display layout, we
recommend connecting your monitors consecutively and arranging your monitors in pairs.
Using PowerDesk to manage your multi-display layout
In a multi-card setup using Matrox Mura MPX Series cards, PowerDesk assigns letters
to the GPU and numbers to the outputs associated with that GPU.
In the examples below, the order of the first card (4 outputs) is set as
0
, so its GPUs are identified as
A
and
B
. The four monitors connected to the first card are then identified as
A1
,
A2
,
B1
, and
B2
, which
correspond to the monitors attached to connectors labeled respectively
1
,
2
,
3
, and
4
on your KX20 to
quad-DVI cable.
Using a multi-display layout with an even number of columns
This multi-display layout shows a 6 × 4 display wall. In this case, monitors are paired and follow each
other sequentially from left to right (for example,
A1
,
A2
,
B1
,
B2
,
C1
,
C2
, and so on).
KX20 to quad-DVI cable