Matrox Monarch LCS, Руководство пользователя, Страница: 22 / 106

10
Chapter 2, Matrox Monarch LCS Hardware and Connections
• When using HDMI video, it is recommended to first use HDMI Input A.
Monarch LCS supports the first two channels of uncompressed embedded audio
from the HDMI input source for streaming and recording. HDCP and SD sources
are not supported on this input. You can monitor the HDMI input source by
connecting an HDMI monitor to Monarch LCS' HDMI output. To select whether
to stream and record the first two audio channels present in the HDMI input or
the audio connected to the Monarch LCS analog audio input, see
“Configuring
video and audio settings” on page 29 .
SDI out
Provides a preview of the selected SDI or HDMI input. For audio, you have the
following options:
• Use the first pair of embedded HDMI audio channels.
• Use the 16 SDI audio channels.
• Use the analog pair.
¦ Note For more information, see “Configuring video and audio settings” on
page 29 .
To monitor your input source, the SDI monitor must support the video input
format.
SDI in
Provides an input for SDI video (YUV only) from an SDI device for streaming
and recording. For information on supported SDI input formats, see
“Supported
input formats” on page 2 .
Monarch LCS supports the first two channels of uncompressed embedded audio
from the SDI input source for streaming and recording. You can monitor the SDI
input source by connecting an SDI monitor to Monarch LCS' SDI output. To
select whether to stream and record the first two audio channels present in the
SDI input or the audio connected to the Monarch LCS analog audio input, see
“Configuring video and audio settings” on page 29 .
AUX
The AUX connector is currently for internal use only.
Analog audio output
Provides an unbalanced stereo analog audio output for monitoring the audio
selected as the audio input source.
¦ Note There may be a slight offset between the HDMI, SDI and analog outputs.
Offsets can vary based on the source and operating mode.