Matrox Monarch EDGE Series Скачать руководство пользователя страница 66

Страница: 66 / 78

Technical specifications

| 55 |

Part # V11470-301-0101

Last updated: July 27, 2020

•

Line voltage: 100-240 VAC

•

Frequency: 50-60 Hz

•

Input connector: IEC320-C14

•

Output connector: DIN4 Locking power

•

Nominal output voltage: 12 VDC

•

Maximum power output: 60 W

•

Maximum current output: 5 amp

International Adapter

•

US, UK, European

Connections

SDI inputs:

•

12G SDI input per SMPTE ST 2082

•

3G SDI inputs per SMPTE ST 425 (Level A mapping only)

•

Supported video formats (auto-detected):

–

3840

2160p at 50, 59.94, and 60 fps

–

1920

1080p at 50, 59.94, and 60 fps

–

1920

1080i at 25 and 29.97

–

1280

720p at 50, 59.94, and 60 fps

•

2-channel, 24-bit SDI embedded audio, 48 kHz sample rate, synchronous

•

SDI compliant with SMPTE ST 292M/424M(Level A)/425M

•

BNC connectors (75 Ohms), terminated

Data ports:

•

Two GbE (Gigabit Ethernet) ports

•

Two MSA-compatible SFP28 cages supporting 10 and 25 GbE modules (third-party
modules required)

Balanced analog audio input:

•

2 XLR input channels (left and right)

•

Max Input Level = 22 dBu (headroom)

•

Frequency Response @ line level (4 dBu): 20 Hz to 20 kHz

•

THD+N @ 1 kHz, 4dBu < 0.05%

•

Analog gain available for microphone: +86 dB

Balanced analog audio output:

1. Currently, UHD supports square-division only when using 4 x 3G SDI to transport the video.
2. To be supported in a future release.

Содержание Monarch EDGE Series















































































Результаты поиска

Содержание Monarch EDGE Series

Отзывы:

Matrox Monarch EDGE Series, Инструкция по установке и эксплуатации, Страница: 66 / 78

Результаты поиска

Содержание Monarch EDGE Series

Отзывы: