Matrox Monarch EDGE Series Скачать руководство пользователя страница 57

Страница: 57 / 78

Monarch EDGE Control Hub configuration

| 46 |

Part # V11470-301-0101

Last updated: July 27, 2020

Configuring Network settings

This section describes the

Network

settings in Monarch EDGE Control Hub.

NOTE

For illustration purposes, LAN2 is not connected in this example. If there were a

secondary LAN connection, the same settings as LAN1 would apply.

Setting

Description

IPv4 address

An IP address between 192.168.0.0 and 192.168.255.255 (recom-
mended). Also, we recommend you assign an IP address within the sub-
net of your network.

IPv4 netmask

The subnet mask defining group of IP addresses in your subnet. By
default, the subnet mask is 255.255.255.0.

IPv4 gateway

The gateway is often the same as your IP address, but the last byte may
be 0 or 1.

DNS servers

The address of your DNS (Domain Name System) server or servers. If
multiple addresses are entered, separate each address with a space.

Содержание Monarch EDGE Series















































































Результаты поиска

Содержание Monarch EDGE Series

Отзывы:

Matrox Monarch EDGE Series, Инструкция по установке и эксплуатации, Страница: 57 / 78

Результаты поиска

Содержание Monarch EDGE Series

Отзывы: