User and device management
| 25 |
Part # V11470-301-0101
Last updated: July 27, 2020
Step 4.
Open the Control Hub menu at the top left again, but this time click on
Change user
.
Step 5.
Enter the username and password of the user you just created in
Step 6.
Click
Apply
.
Step outcome:
You are now logged on to the environment as the new user you
created, with the same administrator rights as the original environment
administrator.
Step 7.
From the list of users displayed, click on the original environment administra-
tor account, then click
Delete user
.
Step 8.
Click
Yes
to confirm, then
Apply
to apply the change to the environment.
Result of this task:
You have created a new environment administrator to replace the original
environment administrator. You can do this as many times as needed.
When done, remember:
You can always factory reset any Monarch EDGE device to completely
remove all environment administrator control from it.
Changing the environment password
Environment administrators can change the password across all devices in the environment.
To change the environment password, follow the steps below:
Step 1.
Go to
Start > Programs > Matrox Monarch EDGE Control Hub
.
Step outcome:
Control Hub displays the Monarch EDGE devices.