Matrox Monarch EDGE Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 78

Matrox Monarch EDGE Series Скачать руководство пользователя страница 14

Introduction

| 3 |

Part # V11470-301-0101

Last updated: July 27, 2020

For full hardware and other technical specifications, such as the supported video formats, see
"

Technical specifications

Installation and configuration overview

This section provides a general roadmap for getting started with Monarch EDGE Encoder and
Decoder devices. For more detailed information, links are provided to refer you to the relevant
topics described in other parts of this manual.

Step 1.

Read the Release Notes

Before getting started, it is always recommended to

read the

Matrox Monarch EDGE Release Notes

available on the

Matrox website

where you download the installation package. The Release Notes contain the
latest information about the release, including new features and known issues.

Step 2.

Connect your Hardware

Start by connecting and powering up your Mon-

arch EDGE device(s). A DHCP network is recommended for device discovery.
The setup sheet included with your product describes the basic connections.

More info:

see the following sections:



Matrox Monarch EDGE front connections



Matrox Monarch EDGE rear connections

Step 3.

Update Monarch EDGE firmware

When you first connect and power up

your Monarch EDGE device, you should check to see which firmware you
have, and update it if it is not the most current version. The setup sheet
included with your product describes the firmware update process.

More info:

see the following sections:



Update and installation prerequisites

.



Updating the Monarch EDGE firmware

.

Step 4.

Install Monarch EDGE Control Hub

This is the application you use to con-

figure and control your Monarch EDGE devices. The version of Monarch
EDGE Control Hub you install must match the firmware version of the Mon-
arch EDGE device(s). The setup sheet included with your product describes
the installation process.

More info:

Installing Monarch EDGE Control Hub

Step 5.

Discover your Monarch EDGE devices

With Monarch EDGE Control Hub

installed, you need to discover the Monarch EDGE devices available on the
network. You can search for specific devices or for a range of devices.

More info:

Network management

.

«
...
12
13
14
15
16
...
»

Содержание Monarch EDGE Series















































































Отзывы:

Нет отзывов