Matrox MC-100 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 52

Matrox MC-100 Скачать руководство пользователя страница 11

3

Last-minute information

°

To update the MC-100 hardware:

1

Download the latest version of the Matrox MC Updater on a Windows
system.

2

Disconnect all SDI and HDMI cables from MC-100.

3

Power your MC-100 (see

“Powering Matrox MC-100”

), and then

connect a third-party USB cable from MC-100’s USB port to your
computer’s USB port.

¦

Note

If your computer does not have a USB port, or if it has a different type

of USB port, you can use a compatible USB adapter/cable.

4

Run the Matrox MC Updater.

5

If an update is required for your MC-100 firmware and/or FPGA, the

Update

button will be active in the Matrox MC Updater window. If the

MC-100 hardware is up to date, but you wish to force a hardware update,
select

Force update

. Click

Update

to begin the MC-100 update.

¡ Important

To avoid damaging the MC-100 hardware, do not turn off your

computer, remove power from MC-100, or disconnect it from your computer
during the hardware update.

6

When prompted by the updater, disconnect and then reconnect the MC-100
power supply cable to complete the firmware update.

Last-minute information

Any important information that wasn’t available for inclusion in this manual by
publication time is provided to you in the

Matrox MC-100 Release Notes

.

«
...
9
10
11
12
13
...
»

Содержание MC-100





















































Отзывы:

Нет отзывов