Matrox Matrox Radient eV-CXP Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 70

Matrox Matrox Radient eV-CXP Скачать руководство пользователя страница 57

Connectors on the Matrox Radient eV-CXP board 57

The pinout for auxiliary I/O connector 0 is as follows. Auxiliary I/O connectors
1, 2, and 3 have the same pinout as auxiliary I/O connector 0, except you must
add 8, 16, or 24, respectively, to their signal numbers. For example,
AUX(TRIG)_TTL_IO_4 (TTL auxiliary 4) on connector 0 would be
AUX(TRIG)_TTL_IO_12 (TTL auxiliary 12) on connector 1.

Pin Signal

Description

1

AUX(TRIG)_TTL_IO_4

TTL auxiliary 4 (input/output).

Supported functionality: exposure timer output, trigger input or user-defined input/output.

2

AUX(TRIG)_TTL_IO_5

TTL auxiliary 5 (input/output).

Supported functionality: exposure timer output, trigger input, or user-defined input/output.

3

AUX(TRIG)_TTL_IO_6

TTL auxiliary 6 (input/output).

Supported functionality: exposure timer output, trigger input, or user-defined input/output,

4

AUX(TRIG)_L

LVDS auxiliary 2 (input) (positive).

Supported functionality: trigger input, user-defined input, or quadrature input bit 0.

5

AUX(TRIG)_LVDS_IN2-

LVDS auxiliary 2 (input) (negative).

See pin 4 for more information.

6

AUX(TRIG)_L

LVDS auxiliary 3 (input) (positive).

Supported functionality: trigger input, user-defined input, or quadrature input bit 1.

7

GND

Ground.

8.

AUX(TRIG)_LVDS_IN3-

LVDS auxiliary 3 (input) (negative).

See pin 6 for more information.

9

AUX(TRIG)_OPTO_IN0-

Opto-isolated auxiliary 0 (input) (negative).

See pin 15 for more information.

10 GND

Ground.

11 AUX(TRIG)_OPTO_IN1-

Opto-isolated auxiliary 1 (input) (negative).

See pin 12 for more information.

12 AUX(TRIG)_O

Opto-isolated auxiliary 1 (input) (positive).

Supported functionality: trigger input or user-defined input.

13 AUX(EXP)_LV LVDS auxiliary 7 (output) (positive).

Supported functionality: exposure timer output or user-defined output.

14 AUX(EXP)_LVDS_OUT7-

LVDS auxiliary 7 (output) (negative).

See pin 13 for more information.

15 AUX(TRIG)_O

Opto-isolated auxiliary 0 (input) (positive).

Supported functionality: trigger input or user-defined input.

«
...
55
56
57
58
59
...
»

Содержание Matrox Radient eV-CXP







































































Отзывы:

Нет отзывов