Matrox Matrox Radient eV-CXP Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 70

Matrox Matrox Radient eV-CXP Скачать руководство пользователя страница 18

18 Chapter 2: Hardware installation

4. Position your Matrox Radient eV-CXP board in the selected PCIe slot. Align the

CoaXPress connectors with the opening at the back of the slot, and move the board
until the connectors pass through the opening.

Important

When installing your Matrox Radient eV-CXP board in a x16 PCIe slot, special
care must be taken to avoid damaging the board. Some x16 PCIe slots have a
connector with a retainer. You should avoid touching the latch of this retainer with
the board. Alternatively, you can remove the latch from the retainer.

5. Once all four CoaXPress input connectors are in the opening in the chassis, press

the board firmly but carefully straight down into the connector of the slot.

6. Anchor the board using the screw that you removed in step 3.

7. Connect the PCIe power cable from your computer’s 12 V power supply to the

PCIe auxiliary power connector on Matrox Radient eV-CXP.

❖

You only need to connect the auxiliary power if you are using PoCXP-compliant
video sources.

8. If required, install the cable adapter brackets, as described in the section

the cable adapter brackets

, later in this chapter.

9. Attach your video sources, as described in the section

Connecting video sources

later in this chapter.

x16 PCIe solder-side latch

x16 PCIe component-side latch

«
...
16
17
18
19
20
...
»

Содержание Matrox Radient eV-CXP







































































Отзывы:

Нет отзывов