Matrox Iris GT MIL Скачать руководство пользователя страница 206

Страница: 206 / 256

206

Appendix I: Matrox Iris portal website details

•

List threads

. Lists all the threads active on Matrox Iris GT. To sort the information

by column, click on a column’s title. For each thread, the following fields and links
are displayed:

•

List modules

. Lists all the modules active on Matrox Iris GT. To sort the

information by column, click on a column’s title. For each module, the following
fields and links are displayed:

MemBase

Specifies the address in memory into which the process loads.

AccKey

This value is reserved.

ProcName

Specifies the process name, without the full path.

Field name

Description

Link name

Description

Threads

Lists all the threads associated with the process. Refer to

list threads

, described below, for a field by field description of the data

displayed.

Modules

Lists all the modules associated with the process. Refer to

list modules

, described below, for a field by field description of the

data displayed.

Map

Lists the address space (both the address space used and reserved) for the process.

Kill

Kills the associated process. Note that this link appears only if the process can be stopped.

Field name

Description

ThreadNum

Specifies the numerical order in which the thread was created.

ThreadID

Specifies a unique identification number for the thread.

ProcID

Specifies the process identification number of the process associated with the thread.

Pri

Specifies the priority of the thread.

CurProc

Specifies the unique identifier of the current process using the thread.

AccKey

This value is reserved.

ProcName

Specifies the process name, without the full path.

Field name

Description

ModNum

Specifies the numerical order in which the module was called.

ModID

Specifies a unique identification number used to identify the module.

GCnt

Specifies how many times the module has been loaded.

BaseAdd

Specifies the address in memory used by the module.

Size

Specifies the size of the module.

Name

Specifies the module name, without the full path.

Содержание Iris GT MIL

































































































































































































































































Результаты поиска

Содержание Iris GT MIL

Отзывы:

Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 206 / 256

Результаты поиска

Содержание Iris GT MIL

Отзывы: