Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 202 / 256

202 Appendix I: Matrox Iris portal website details
- Exposure time . Sets the time for the active portion of the exposure signal (that
is, the exposure time).
- Gain . Sets the input gain with which to amplify the input signal. This allows
you to optimize the amplitude of the video input signal so that the full dynamic
range of the component digitizing the video is used.
- Actual output . Specifies when the user-defined output signals send data.
- Actual input . Specifies when the user-defined input signals receive data.
- Output setting . Allows you to set a user-defined output signal to on.
Field name Description
Grab with reverse X Inverses the image along the horizontal axis.
Grab with reverse Y Inverses the image along the vertical axis.
Field name Description
Exposure time Specifies the time between the exposure and the grab, in msec. The range of this value is limited by the smart
camera’s CCD.
Button name Description
Set Updates your Matrox Iris GT with the settings specified in the Exposure time field.
Field name Description
Gain Specifies the integer value used to determine the input gain. This value can be between 0 and 255, where 0 and 255
are mapped to the minimum and maximum values supported by the camera, respectively.
Button name Description
Set Updates your Matrox Iris GT with the settings specified in the Gain field.
Check box name Description
3...0 Returns when the associated output sends data. This value changes dynamically.
Check box name Description
3...0 Returns a value when the associated input receives data. This value changes dynamically.
Check box name Description
3...0 Sets a specific user-defined output signal to on.