8
Matrox G200 MMS – User Guide
Your Matrox card is now installed. If your Matrox product includes a TV tuner, connect your external
devices
before restarting your computer
(
see “Connection setup”, page 9
After connecting your
external devices,
restart your computer and install your Matrox software (
Note:
Monitors are numbered consecutively based on which
connector each is attached to. Numbering starts with the
primary
display –
the one that first displays information when you restart your
computer. If another graphics card is installed in your computer,
display numbering may be different.
Note:
Your dual-monitor adapter can only be used with the type of
monitor it’s intended for. Analog adapters are included with
Matrox MMS products. Digital adapters are sold separately. For
more information on digital adapters for your Matrox product,
contact your product vendor.
Matrox MMS adapters that support digital monitors use digital
(DVI-D) or analog/digital (DVI-I) connectors.
To connect a
digital
monitor (a monitor that uses digital input,
usually a flat panel monitor) to your Matrox product, your monitor
must have a DVI connector.
Some monitors with DVI connectors support both digital and
analog input. If you’re using one of these monitors with your
Matrox product, make sure it’s configured to use the correct type of
input. For more information, see your monitor documentation.
DVI connector
(digital)
HD-15 connector
(analog)
DVI connector
(analog/digital)
