Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 95 / 160

83
Configuring your video settings
To ensure you make accurate adjustments, you must connect your system
to a vectorscope and select an appropriate test pattern. To check your
timing adjustments, make sure you genlock DigiSuite LX (or the optional
digital module) and all your external devices to the same external video
genlock source.
✃
Display Source Use this list to select the source you want to display
on your NTSC or PAL monitor each time you start your system. For
example, to display your default video source as selected in the
DigiSuite LX Video In dialog box, select Video . To display the
graphic in the DigiSuite LX graphic frame buffer without the internal
key signal, select
Graphic (external key) .
✃
Test Pattern To check the effect of making adjustments to your
output signals, select a test pattern from this list. Your selected pattern
will be displayed on your NTSC or PAL monitor
only while the
DigiSuite LX Video Out dialog box is open.
°Important
To display any of the graphic test patterns, such as the
Graphic for Edge Filtering Adjustment , you must select a graphic
display source from the Display Source list.
✃
Program Output Use this list to select the type of program output
you want to use. For example, to use your composite and S-Video
recorders, select
Composite and Y/C (S-Video) . To use your analog
component recorder, select Analog Component . If you have the
optional digital module, your digital video (SDI) output will always be
available.
✃
Preview Output Source From this list, select the signal type you
want for the preview output from DigiSuite LX. For most applications,
the preview output should be set to
Program . Set the preview output to
Preview only if you’re using a program that’s configured to use the
preview output signal.
✃
Adjust Timing Click this button to adjust the timing settings for
your system. For details, see “Timing settings for DigiSuite LX
without the digital module” on page 85 or “Timing settings for
DigiSuite LX with the digital module” on page 86 .
✃
SDI Key Output Mode If you have the optional digital module, use
this list to select the type of digital key output you want:
✄
Normal Outputs the digital key signal as-is. The signal will not be
inverted or compressed (see below).