Matrox DigiSuite LX MAX, Руководство пользователя и инструкция по установке

Страница: 103 / 160

91
Configuring your audio settings
Configuring the audio output pairs
To configure your audio output pairs, click the DigiSuite LX tab, then the
Audio Out tab.
°Important
All your audio input and output pairs must be either analog or
digital. Digital audio is available only with the optional digital module.
✃
Analog Output
or
Digital Output
The audio output type will be set
to the same type you selected for your audio input.
✃
Output Pair 1/Output Pair 2
Use these lists to select your default
audio output pairs. For example, to use the recorder connected to your
unbalanced analog OUT 1 and OUT 2 outputs, set
Output Pair 1
to
RCA (unbalanced analog)
.
To ensure that your balanced analog output is properly calibrated for
your recorder, make sure you select the option that matches your
recorder’s audio input impedance. For example, if the audio input
impedance of your recorder is set to 600
Ω
, select
XLR 600 Ohms
(balanced analog)
. If your recorder has a high-impedance audio input
load, select
XLR High Impedance (balanced analog)
.
¯Note Refer to your VTR’s documentation for instructions on how to
set the audio input impedance. If you’re unsure of your VTR’s setting,
select
XLR High Impedance (balanced analog)
.
✃
Output Pair 1 Gain/Output Pair 2 Gain
Use these controls to adjust
the default gain of your analog audio output pairs. To obtain a precise
setting, click the arrows instead of dragging the slider. To return to the
factory default setting, click the
Def
button.