manualshive.com logo in svg

Matrox 4Sight EV6, Установка и справочник по оборудованию

Поделиться
Скачать
Matrox 4Sight EV6 Скачать руководство пользователя страница 19

 Manual overview      19

Manual overview

This installation and hardware reference explains how to setup your 
Matrox 4Sight EV6 and connect external and internal devices.

This manual contains the following information:

•

Chapter 1: Before you begin

 introduces you to the key features of your 

Matrox 4Sight EV6 unit.

•

Chapter 2: Getting started with your Matrox  4Sight  EV6 unit

 details how to get your 

Matrox 4Sight EV6 up and running. It includes instructions for connecting 
various peripherals to the front and back panels of the Matrox 4Sight EV6 unit.

•

Chapter 3: Adding devices to Matrox 4Sight EV6

 details how to add devices to the 

Matrox 4Sight EV6 motherboard.

• The appendices provide useful information regarding the Matrox  4Sight  EV6 unit 

and its modules. The appendices include a technical reference and a glossary.

Need help?

If you experience problems during installation or while using this product, you 
can refer to the support page on the Matrox Imaging web site: 
http://www.matrox.com/imaging/en/support. The support page provides answers 
to frequently asked questions and offers registered customers additional ways of 
obtaining support.

If your question is not addressed and you are registered, contact technical support. 
To do so, you should first complete and submit the online Technical Support 
Request Form, accessible from the above-mentioned web page. Once you have 
submitted the information, a Matrox support agent will contact you shortly 
thereafter by email or phone, depending on the problem.

Содержание 4Sight EV6





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды