manualshive.com logo in svg

Matrix SPARSH VP710, Руководство пользователя, Страница: 448 / 1046

Поделиться
Скачать
Matrix SPARSH VP710 Скачать руководство пользователя страница 448

440

Matrix SPARSH VP710 User Guide

Do Not Disturb (DND)

You can use DND to reject incoming calls automatically on the phone. Callers will receive a busy message.All calls 
you receive when DND is enabled are logged in the missed calls list. You can receive incoming calls from 
authorized numbers when DND is enabled.

DND feature can be configured on a phone or a per-line basis depending on the DND mode. 

Two DND modes:

•

Phone (default): DND feature is effective for the IP phone.

•

Custom: DND feature can be configured for each or all accounts.

A user can activate or deactivate DND using the DND key on the phone. The server-side DND feature disables the
local DND and call forward settings. If the server-side DND feature is enabled on any of the IP phone’s 
registrations, the other registrations are not affected. 

The DND on code and DND off code configured on IP phones are used to activate/deactivate the server-side DND 
feature. They may vary on different servers.

Return Message When DND

This feature defines the return code and the reason of the SIP response message for the rejected incoming call 
when DND is enabled on the IP phone. The caller’s phone touch screen displays the received return code.

DND Emergency

This feature allows users to receive the incoming calls from some authorized numbers even if the DND feature is 
enabled. This feature is disabled by default.

Procedure

DND can be configured using the configuration files or locally.

Configuration File

<MAC>.cfg

Assign a DND key.

Configure the DND mode.

Configure DND in the phone mode.

Configure DND in the custom mode.

Specify the authorized numbers when 
DND is enabled.

Specify the return code and the reason of 
the SIP response message when DND is 
enabled.

For more information, refer 

“Appendix D - 

Configuration Parameters”

.

Содержание SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов