manualshive.com logo in svg

Matrix SIMADO GFXD1111S, Системное руководство

Поделиться
Скачать
Matrix SIMADO GFXD1111S Скачать руководство пользователя страница 7

Matrix SIMADO GFXD1111S V3 System Manual

1

CHAPTER 1

Introduction

Welcome

Welcome to the world of Telecom Solutions! Thank You for choosing SIMADO GFXD1111S and congratulations for 
your wise choice. This product is designed to give you the highest performance, combined with real ease of use. 
We hope you will make optimum use of this intelligent, intuitive, feature-packed Fixed Cellular Terminal and Router 
with Data Port. Please read this document carefully before installing your SIMADO GFXD1111S.

About this System Manual

SIMADO GFXD1111S System Manual contains detailed information and instructions for installing, configuring and 
using GFXD1111S. This System Manual also contains information on protecting and maintaining the system and 
steps to be followed to default the system in case you are unable to configure it properly. We have made the best 
efforts to let you know your SIMADO GFXD1111S so that it becomes a fun for you to use it.

Intended Audience

This System Manual is aimed at:

•

Network and System Engineer (SE):

 A person who install, configure and maintains SIMADO 

GFXD1111S. It is assumed that they have some experience in installing and programming the similar 
products. System Engineer has full access to the system.

•

System Administrator (SA):

 System Administrator is a person who operates GFXD1111S and performs 

administrative functions. System Administrator has only limited access to the system. 

•

User:

 A person who actually uses SIMADO GFXD1111S.

It is assumed that the Users have some previous experience in operating the similar products. Users are 
not expected to configure the system or program its features. However, it is anticipated that some of them 
may have to or want to configure the system and program its features. Therefore, this document provides 
instructions on installation and configuration in as lucid a manner as possible.

Organization of this Document

This System Manual contains following sections:

Содержание SIMADO GFXD1111S



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды