Matrix simado gfx11, Системное руководство, Страница: 80 / 88

74 Matrix SIMADO GFX11 System Manual
System Commands
Description System Commands
To configure the Country Code 101-Country Code-#*
To clear the Country Code 101-#*
To enable or disable the flag to remove the Country
Code from the CLI received 102-Flag-#*
To enable or disable the dial tone on the FXS Port 103-No Tone when system not registered-#*
To select the country for tone type 104-Code-#*
To restart the System 105-SE Password-#*
To load Default Configuration 106-Reverse SE Password-#*
To change SE Password 107-New SE Password-#*
To change SA Password 108-New SA Password-#*
To know the software version and revision 109-#*
To configure the end of dialing digit 110-Code-#*
To change the SIM PIN 113-New SIM PIN-#*
To register the PUK number 114-PUK Number-New SIM PIN-#*
To configure Security Code Number 121-Security Code Number-#*
To clear Security Code Number 121-#*
To configure Call Proceeding Tone 122-Call Proceeding Tone-#*
To configure Emergency Number at an index 151-Index-Emergency Number-#*
To clear the Emergency Number at an Index 151-Index-#*
To Enable/Disable Mobile Port 201-Code-#*
To Enable/Disable CLIR on Mobile Port 202-Mode-#*
To Enable/Disable Incoming SMS notification on
Mobile Port 203-Flag-#*
To Enable/Disable the Location Information Indication 205-Flag-#*
To configure the answer signal to be generated on
FXS Port 221-Answer Signal-#*
To configure FXS Port CLI Type 222-CLI Type-#*
To configure the gain for CLI generation on the FXS
Port 223-Gain-#*
To configure First Digit Wait Timer 225-First Digit Wait Timer
To configure Inter Digit Wait Timer 226-Inter Digit Wait Timer-#*
To configure DTMF Outdial Option on the Mobile Port 240-DTMF Outdial Option-#*
To configure DTMF Out Dial ON Time for out dialing 241- DTMF Out Dial ON Time -#*
To configure the signal to be generated on disconnect
signal on FXS Port 248-Disconnect Signal-#*
To configure the open loop disconnect timer of FXS
Port 249-Open Loop Disconnect Timer-#*
To configure the Allowed Numbers List 261-Location Index-Number-#*
To clear all numbers from an allowed list 261-0-#*
To clear particular number from an allowed list 261-Location Index-#*
To configure the Denied Numbers List 262-Location Index-Number-#*
To clear all numbers from a denied list 262-0-#*
To clear particular number from a denied list 262-Location Index-#*
To default the Receive Gain 271-0-#*
To configure the Receive Gain 271-Receive Gain-#*