Matrix simado gfx11, Системное руководство, Страница: 63 / 88

Matrix SIMADO GFX11 System Manual 57
Location Information Indication
Whenever you change the location of SIMADO GFX11, the network updates the current location of SIMADO
GFX11. Using the Location Information Indication feature, you can find out the current location of SIMADO GFX11
on the display of the telephone connected to the FXS Port.
Location Information Indication is a service provider-dependent feature. To be able to use this feature, you must do
the following:
• Get this feature enabled by your service provider.
• Configure the CLI Type on the FXS Port as FSK .
How to configure
• Enter SE Mode.
• To enable/disable location information indication on the Mobile Port, dial:
205-Flag-#*
Where,
Flag is
0 for OFF
1 for ON
Default: OFF
• Exit SE Mode.
How to view Location Information
To view the Location Information on your telephone, follow the steps given below:
• Go Off-Hook.
• Dial #*12
• You will get confirmation tone.
• Go On-Hook.
• The Location Information will be displayed on the LCD of your telephone as shown below.
• Go Off-Hook again, you will get dial tone.
If no information is available from the network, the message 'NO LOCATION' will be displayed.
MAKARPURA-GIDC