Matrix simado gfx11 Скачать руководство пользователя страница 50

Страница: 50 / 88

Matrix SIMADO GFX11 System Manual

Call Divert

The Call Divert feature of SIMADO GFX11 enables you to divert your calls to another destination number of your
choice.

Call divert is a service provider dependent feature. To use this feature, it should be activated by your GSM service
provider on the SIM Card inserted in SIMADO GFX11.

SIMADO GFX11 supports four types of Call Divert:

•

Call Divert-Unconditional:

All incoming calls on the Mobile Port are diverted unconditionally to the

desired destination number.

•

Call Divert-When busy

: All incoming calls on the Mobile Port are diverted to the desired destination

number, if the FXS Port is busy.

•

Call Divert-When No Reply

: All incoming calls on the Mobile Port are diverted to the desired destination

number, if the FXS Port does not answer the call.

•

Call Divert-When SIMADO GFX11 is Off

or there is no coverage

: All incoming calls on the Mobile Port

are diverted to the desired destination number, if SIMADO GFX11 is switched off or there is no network
coverage.

You can select the type of Call Divert you want to use and configure the desired destination number.

How to configure

Call Divert feature can be configured from the SE mode as well as from the SA mode.

•

Enter SE/SA Mode.

•

To set call divert, dial:

620-Option-Code-Destination Number-#*

Where,
Destination Number is the number to which the calls are to be diverted. Destination number can be of
maximum 16 digits.

Option is:
1 for All Calls - Unconditional
2 for When Busy
3 for when No Reply
4 for When SIMADO GFX11 is Off or No Network Coverage

Code is:
0 for Disable
1 for Enable

Default:

Disabled

To cancel call divert, dial:

620-Option-Code-#*

Содержание simado gfx11

























































































Результаты поиска

Содержание simado gfx11

Отзывы:

Matrix simado gfx11, Системное руководство, Страница: 50 / 88

Результаты поиска

Содержание simado gfx11

Отзывы: