Matrix SETU VG Series, Быстрый старт

Страница: 9 / 24

Matrix SETU VG Quick Start 3
Installing SETU VG
Before You Start
Before you begin to install and set up the hardware of SETU VG, make sure you have the following
ready:
• A suitable location to install SETU VG.
• Power supply.
• A SIP Account from an ITSP to test VoIP connectivity.
• A standalone computer or a computer connected in a LAN to access Jeeves, the web-based
configuration tool of SETU VG.
• Appropriate cables and connectors to set up and test the WAN interface of SETU VG and the
LAN connection.
• A SIM Card to test Mobile connectivity.
• Do not install this product near any area where,
•
it is exposed to direct sunlight, heat, excessive cold or humidity, dust, oil, corrosive fumes.
• there is a water source (wash basin, tub, shower, pool, sprinkler, etc.)
• there is source of electromagnetic noise such as radio equipment, heavy transformers, faulty electric
chokes of tube-lights, device having a faulty coil.
• Ensure proper electrical earth and telecom earth for the safety of the product and persons handling it.
• Always wear an electro static discharge preventive wrist wrap or belt and use a grounding mat when handling
the product and its parts.
• SETU VG contains a 3VDC/18mAh (Li-Al) alloy-Manganese Dioxide Coin Battery (ML 1220 - Rechargeable)
of diameter 12.5mm and height 2.0mm. Battery should be replaced only by authorized dealers of Matrix.
There is a risk of explosion if the Battery is replaced in an incorrect manner. Please dispose-off used
Batteries.
Getting Started
• Select an appropriate site to install the SETU VG, considering the safety precautions listed
earlier in this chapter.
• Unpack SETU VG and verify the package contents. The Package of SETU VG8 contains:
• SETU VG Unit
• Power Adapter - 12VDC, 2A (Country Specific)
• Universal Converter Plug 2 PIN
• Interchangeable Plug EU
• Two
1
GSM Antenna with SMA Connector