Matrix SETU VFXTH System Manual
60
Route Calls without any Destination Number
In this method, all calls received on the FXO Port are directly routed to the fixed destination port, configured for this
port, regardless of the Destination Number.
•
To apply this method, in the
Route all incoming calls (with CLI)
list, click
without any Destination
Number
.
Route to the Fixed Destination Number
In this method, calls received on the FXO Port are routed to a fixed destination number, which you must configure
for this port.
To apply this method, do the following:
•
In the
Route all incoming calls (with CLI)
list, click
to the Fixed Destination Number
.
•
In the
Fixed Destination Number
field that appears, enter the desired destination number.
The Destination Number may consist of a maximum of 24 digits. Valid digits are 0 to 9, *, # and (.) dot.
Default: Blank.
•
Click
Submit
to save the changes.
Route on the basis of Calling Party Number
In this method, a call received on the FXO Port is routed to a specific destination number, as per the calling party's
number. For this, the calling party numbers and their corresponding destination numbers must be configured in the
Calling Party Number Based Table.
Whenever there is an incoming call on the FXO Port, SETU VFXTH will match the Calling Party Number with the
entries of the Calling Party Number Based Table. If a match is found, the call will be routed to the destination
number configured for that Calling Party Number.
