Matrix SETU VFXTH System Manual
40
Handling of Outgoing Calls
•
Click
Handling of Outgoing Calls
.
•
If you do not want to route calls through this port, select the
Block Calls through this FXS Port
check
box. Default: Disabled.
Destination Port Determination
•
In the
Select Destination Port for routing calls
, select the method to be used for determining the
Destination Port for routing calls from the FXS Port. You may select any one of these options:
•
Fixed
•
on the basis of Destination Number
Default: on the basis of Destination Number
Read further for instructions on selecting and configuring each of these destination port determination
methods.
If the destination number to be dialed out is an IP Address, SETU VFXTH will not check the Destination
Port Determination Method. Instead, it will route the call using the SIP Trunk / Group programmed for IP
Dialing. (To know more, see the feature description
).
Fixed
In this method, outgoing calls made from the FXS Port are routed to a Fixed Destination Port, irrespective of the
number dialed from the FXS Port.
To apply this method, do the following:
•
In the
Select Destination Port for routing calls
box, click
Fixed
.
