Matrix SETU VFXTH Скачать руководство пользователя

Страница: 267 / 322

Matrix SETU VFXTH System Manual

262

•

Product Name:

This field displays the name of the product.

•

WAN Port:

This field displays the number of WAN (Ethernet) Port in the system.

•

FXS Port:

This field displays the number of FXS Port in the system.

•

FXO Port:

This field displays the number of FXO Port in the system.

•

VoIP DSP Module:

This field displays the number of VoIP DSP Modules present in the system.

•

System Software Version-Revision:

This field displays the current version and revision of the

firmware of SETU VFXTH.

•

Kernel Date:

This field displays the Kernel compilation date.

•

Stack Status:

This field displays the SIP Stack Status.

•

CPLD Version Revision:

This field displays the CPLD version revision.

•

System Temperature (

C):

This field displays the Temperature of the System.

•

WAN Port MAC Address:

This field displays the factory set MAC Address of the WAN (Ethernet) Port.

If you have cloned the MAC Address of the WAN (Ethernet) Port, you can view it in Network Status.

•

Serial Number of the Product:

This field displays the Serial Number of the product.

•

Hardware Design of Main Board:

This field displays the Hardware Design of the Main Board.

•

Hardware Design of DSP Module:

This field displays the Hardware Design of the DSP Module.

•

VoIP DSP Module (AudioCodes AC49008 - 8 Channel):

This field displays the VoIP DSP Module

present in the system.

Firmware

•

Click the

Firmware

link.

The following information related to Auto-Firmware upgrade will appear on your screen.

Содержание SETU VFXTH



































































































































































































































































































































Результаты поиска

Содержание SETU VFXTH

Отзывы:

Похожие инструкции для SETU VFXTH

Бренды по названию

Популярные бренды

Matrix SETU VFXTH, Системное руководство

Результаты поиска

Содержание SETU VFXTH

Отзывы:

Похожие инструкции для SETU VFXTH

Бренды по названию

Популярные бренды