Matrix SETU VFX44L, Системное руководство

Страница: 98 / 195

Matrix
98 SETU VFX88L
/
VFX44L V1
System Manual
End of Dialing
What’s this?
• End of dialing is a mechanism by which end of number string is
interpreted and the gateway can start out dialing faster. It will
reduce delay for the inter digit wait timer.
• The gateway support following mechanisms for using as “End of
Dialing” for the FXS-Port:
• End of Dialing Digit
• Number length
• Inter Digit Wait Timer
• Length of digit programmed is useful for some features. For
Example, for Peer-to-Peer Calling it is required that fixed 4 digit
extension number has to be dialed. Hence Number of digits
programmed will be ‘4’ and after entering 4-digits, the gateway will
dial out the number.
• Similarly if ‘#’ is programmed then dialing “#” after entering the
number, will be required for faster dialing. Only * or # can be
considered as ‘End of Dialing Digit’
•
By default, ‘#’ digit is considered as End of dialing digit for
each FXS port.
• After entering few digits if you do not dial any digit and time Inter
Digit Wait Timer is expired, then system will consider it as end of
dialing and system will dial out few digits only.
How it works?
• The option of enable/disable can be programmed for any of the
above mechanisms.
• If all are enabled, end of dialing is interpreted on the basis of first
trigger received. For example, ‘#’ is set for End of dialing digit,
number length is set to 5 and inter digit wait timer is set to 6
seconds, then end of dialing is considered using ‘#’ if received
after 3 digits. Likewise, end of dialing is interpreted if the inter digit
timer expires after few digits or end of dialing is interpreted if 5
digits are received.
• If all options are disabled, “Inter Digit Wait Timer” is considered as
End of Dialing method.
• End of Dialing is programmable for each FXS port.