Matrix SETU VFX44L, Системное руководство

Страница: 52 / 195

Matrix
52 SETU VFX88L
/
VFX44L V1
System Manual
Call Detail Record (CDR)
What’s this?
• It is a kind of report for the calls, containing information about the
gateway’s usage when call was made. With Call Detail Record
(CDR) feature it is possible to know following details of a call:
• Source Port (Maximum 5 characters)
• Terminating Port (Maximum 5 characters)
• Calling Party Number (Maximum 24 digits)
• Called Party Number (Maximum 24 digits)
• Date of call origination (Maximum 11 digits)
• Time of the call origination (Maximum 5 digits)
• Duration of call (Maximum 4 digits)-Seconds
• It is also possible to filter out the details like, calls made to specific
numbers, calls received from specific numbers and based on the
duration of call, etc. Refer a CDR report at the end of chapter.
How it works?
• The feature works only if “Apply Filter” is enabled on the Web page.
• Maximum of 2000 call records can be stored.
• Call record entries are stored in FIFO logic.
• A call is stored when it gets matured.
• The number list containing Called party number and another
Number List containing Calling party numbers are assigned for the
Called or Calling Number List Filter. Now when the filter is applied,
the calls with the number programmed in the number list only will
be displayed in CDR.
For Example:
• If source port is FXS port:
• Called Party Number stored in the Call records will be the number
dialed by the caller or the Hotline Number.
• The Calling Party Number stored in the Call records are the
number programmed in the FXS Port Parameters for that port.
•
If source port of SIP Account:
• Called Party Number stored in the Call records will be the Called
Party Number received in the SIP Message.