Matrix SETU VFX44L, Системное руководство

Страница: 120 / 195

Matrix
120 SETU VFX88L
/
VFX44L V1
System Manual
Peer-to-Peer Calling
What’s this?
• Making a call on the VoIP port without going through any proxy is
called Peer-to-Peer (P2P) Calling.
For example:
• Two gateways are installed at one Mumbai office and the other at
Chennai office as shown below These two gateways are connected
to each other by the virtual LAN (VLAN).
• Now if you want to call from Mumbai office to Chennai office
without proxy server to route the call following information for the
gateway at Chennai office, will be required:
• Extension number
• IP address
• SIP Listen Port Number
• Program the Peer-to-Peer call table for the gateway at Mumbai
office, using above information in Number, Destination Address and
Destination Port column respectively.
• You have to dial just ‘2002’ to call the gateway of Chennai office.
• Similarly networking in with other branch office in different cities
can
be done.
The table will look as shown below:
Index Number
Destination
Address
Destination
Port
Name
001 No Match found (
Note1
) 192.168.001.156 5060
002 2002 202.197.69.54 5070 Chennai
Note 1:
As shown in table, if no match is found for the dialed number,
then gateway will use first-entry for call routing. For this, the
Destination Address is 192.168.001.156, Destination port is
5060, Number field is uneditable and Name field is blank.