Matrix NAVAN CNX200, Системное руководство

Страница: 693 / 1388

Matrix NAVAN CNX200 System Manual 683
• Click the Number Based sub-link to open the page.
• Enter the values of the Number-based LCR you prepared on the sheet of paper in the appropriate fields.
• Click Submit to save your settings.
Configuring Time and Number based LCR
• This is a combination of the Time Zone-based and Number-based LCR. You may use this feature if your
service providers offer lower call rates for calls made to certain numbers during a certain time of the day.
• On a sheet of paper, make a table for Time and Number-based LCR.
• Define the Time Zones when the service providers offer lower tariff. You can define up to 8 time zones.
• For each Time Zone you define, specify the Number strings on which lower tariff is applied during that
Time Zone.
• For each Number string you enter for a particular time zone, assign Cost Factor. Select the trunk with the
lowest cost as your first preference. Select trunks of your second, third and fourth preference (in order of
increasing cost). Refer to the table you prepared for assigning Cost Factor.
• You can enter up to 99 different number strings, which are stored at Index numbers from 01 to 99. The
Number strings may be complete telephone numbers, truncated phone numbers or area codes.
When the trunk you selected as first preference is busy, the system will route the call through the next
trunk you set as preference if it is free.