Matrix NAVAN CNX200 Скачать руководство пользователя страница 644

Страница: 644 / 1388

634

Matrix NAVAN CNX200 System Manual

•

If the flag is enabled, CDC is applied on the call.

•

Warning beeps are played to A, who made the call.

Feature Interactions:

•

Call Transfer:

In case of transferred call, the CDC timer gets reset and starts again afresh on the

transferred extension.

•

Conference, Conversation Recording and Call Taping:

CDC is treated as turned OFF.

•

Call Park and Call Hold (Exclusive and Global):

CDC is treated as turned ON.

•

Interrupt Request, Barge-In and Raid:

CDC is treated as turned ON.

•

Emergency Number Dialing:

Emergency calls are not affected by this feature, that is, CDC will not be

applied on the dialing of Emergency Numbers.

How to configure

To use this feature on extensions,

•

Configure Call Duration Control Profiles. You may configure up to 4 different Profiles.

•

Assign a CDC Profile to the extensions on which you want to apply this feature.

•

Enable CDC for incoming and outgoing calls received on/made from the Trunks on which you want to
apply this feature.

To configure Call Duration Control Profiles,

•

First, decide the types of calls - Outgoing, Incoming and Internal - on which CDC is to be enabled.

•

Make a list of numbers on which CDC will be applied, and a list of numbers on which CDC will not be
applied.

•

Make a list of extensions on which CDC will be applied and the CDC Profile number you want to assign to
these extensions.

•

Also decide the trunks on which CDC will be applied for incoming and/or outgoing calls.

Warning Beep

Default: 160 secs.

Default: 20 secs.

Total time after which call will be disconnected

Содержание NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NAVAN CNX200

Отзывы:

Бренды по названию

Популярные бренды

Matrix NAVAN CNX200, Системное руководство

Результаты поиска

Содержание NAVAN CNX200

Отзывы:

Бренды по названию

Популярные бренды