manualshive.com logo in svg

Matrix NAVAN CNX200, Системное руководство

Поделиться
Скачать
Matrix NAVAN CNX200 Скачать руководство пользователя страница 604

594

Matrix NAVAN CNX200 System Manual

Call Back on Trunk Ports

The feature Call Back on Trunk Ports is used to respond to missed calls from particular numbers on the different 
trunk ports of NAVAN: CO, Mobile and SIP trunks.

When the Call Back feature is enabled on a trunk port, and there is a missed call on that trunk port, the NAVAN 
determines if the calling number is eligible for a call back or not. It calls back the same number or an alternative 
number configured for that number, either from the port on which it was received or from a different port, depending 
on the configuration. NAVAN can be configured to choose the most cost effective line to call back the missed call 
numbers.

Employees at remote locations can use this feature to have the NAVAN installed in their office call them back, 
thereby saving on charges (e.g. roaming charges on mobile calls), where applicable.

How it works

For this feature to work:

•

Call Back must be enabled on the desired Trunk Ports.

•

The ‘Call Back Timer’ may be configured. When the caller disconnects within the Call Back Timer, the Call 
Back will be applied for that number.

•

You must define ‘Call Back to’, i.e. you must select whether the number which must be called back should 
be the same CLI number as on the received call or an alternative number.

•

The CLI of those callers whom the system should call back as well must be configured in a List. Also, if you 
want the call back to be made to an alternative number, the alternative number must also be configured in 
a list.

•

You must select the trunks through which the call back should be made. If necessary, you may enable 
Least Cost Routing on the outgoing trunks you selected for call back.

•

Select a ‘Call Back Mode’, i.e. how the call should be routed when the call back is answered by the remote 
party; whether it should be routed as Operator, Built-In Auto Attendant, or DISA.

Following is an example of a Call Back on a mobile port, when the above parameters are configured.

•

Caller

 

A

 calls mobile port 1.

•

The system checks if the Call Back is enabled on mobile port 1.

•

The flag is enabled.

•

The system matches the CLI of A with the Call Back profile assigned to the mobile port 1 to determine if 
the calling number is eligible for a call back.

•

A

 match is found in the list configured in the Call Back profile.

96

96.

If the system does not find a match for the CLI of the caller in the list, the 'Call Back' feature will not be applicable and the call will 

be processed according to the normal incoming call logic.

Содержание NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды