Matrix NAVAN CNX200, Системное руководство

Страница: 362 / 1388

352 Matrix NAVAN CNX200 System Manual
3.
Select the call privilege for Calls allowed for Lock Level 2 : No Calls, Local Calls, Regional Calls, National
Calls, International Calls, All Calls, Limited Calls 1/2/3.
4.
Select the call privilege for Calls allowed for Lock Level 3: No Calls, Local Calls, Regional Calls, National
Calls, International Calls, All Calls, Limited Calls 1/2/3.
The Lock Levels on this page are based on the allowed and denied number lists of Local, Regional,
National, International, and Limited Call numbers you configured on the
“Toll Control” page.
5.
If you have not configured the allowed and denied number list for the Calls allowed/denied for the selected
Lock Level, or if you want to add to the existing lists, you may do it now. The
Settings icon does not
appear when you select No Calls and All Calls option.
• Click the Settings icon.
• The Toll Control - Allowed-Denied Numbers page will open in a new window.
• Configure the Allowed and Denied Numbers for Local, Regional, National, International, and Limited
Calls.
• Click Submit.
• Close the window after you have configured the list.
Select Trunks for Outgoing Calls
Outgoing calls (to external numbers) are made by dialing Trunk Access Codes (TAC).
• TAC for users worldwide are: 0, 5. Default: 0 and 5.
• TAC for users in USA are: 9, 5.
For each TAC, you need to select the Outgoing Trunks. All external calls made by dialing a particular TAC will be
routed through the outgoing trunks you selected for that TAC.
You can also apply Least Cost Routing logic on the selected trunks, so that NAVAN routes the outgoing call
through the trunk that costs the lowest for the call.
1.
Click Select Trunks for Outgoing Calls to expand options.
2.
Select Trunks allowed for dialing ‘0’ . The outgoing call will be routed through the selected trunks when
the extension user dials TAC ‘0’.
• Double-click the field. A multiple selection box opens.
On the left, the trunks appear with their names (if configured in “Trunks” ) and port numbers in a
sequence, starting with CO trunks, followed by Mobile trunks and SIP trunks.