manualshive.com logo in svg

Matrix NAVAN CNX200, Системное руководство

Поделиться
Скачать
Matrix NAVAN CNX200 Скачать руководство пользователя страница 1363

Matrix NAVAN CNX200 System Manual

1353

Warranty Statement

Matrix ComSec Pvt. Ltd. (Matrix) warrants to its consumer purchaser any of its products to be free of defects in 
material, workmanship and performance for a period of 15 months from date of manufacturing or 12 months from 
the date of installation which ever is earlier.

During this warranty period, Matrix will at its option, repair or replace the product at no additional charge if the 
product is found to have manufacturing defect. Any replacement product or part(s) may be furnished on an 
exchange basis, which shall be new or like-new, provided that it has functionality at least equal to that of the 
product, being replaced. All replacement parts and products will be the property of Matrix. Parts repaired or 
replaced will be under warranty throughout the remainder of the original warranty period only.

This limited warranty does not apply to:

1.

Products that have been subjected to abuse, accident, natural disaster, misuse, modification, tampering, 
faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the 
documentation for the product or if the model or serial number has been altered, tampered with, defaced or 
removed.

2.

Products which have been damaged by lightning storms, water or power surges or which have been 
neglected, altered, used for a purpose other than the one for which they were manufactured, repaired by 
customer or any party without Matrix’s written authorization or used in any manner inconsistent with 
Matrix’s instructions.

3.

Products received improperly packed or physically damaged. 

4.

Products damaged due to operation of product outside the products’ specifications or use without 
designated protections.

Warranty valid only if:

•

Primary protection on all the ports provided.

•

Mains supply is within limit and protected.

•

Environment conditions are maintained as per the product specifications.

Warranty Card:

•

When the product is installed, please return the warranty card with:

•

Date, signature and stamp of the customer

•

Date, signature and stamp of the channel partner

•

Matrix assumes that the customer agrees with the warranty terms even when the warranty card is not 
signed and returned as suggested.

The Purchaser shall have to bear shipping charges for sending product to Matrix for testing/rectification. The 
product shall be shipped to the Purchaser at no-charge if the material is found to be under warranty. The Purchaser 
shall have to either insure the product or assume liability for loss or damage during transit. 

Matrix reserves the right to waive off or make any changes in its warranty policy without giving any notice.

Содержание NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды