C
ONSOLE
I
NSTRUCTIONS
XR
12
Troubleshooting Guide
Energy Saver (Standby Mode)
To turn Energy Saver mode on:
1.
Enter Engineering mode:
a.
Treadmills: Press and hold Incline Up and Speed Down for five to 10 seconds.
b.
All other frames: Press and hold Resistance Up and Resistance Down for five to 10
seconds.
2.
Press an up/(
↑
) arrow button (on the console screen or the platform) until “SWITCH FUNCTION”
appears.
3.
Press the Enter/
√
button.
4.
Press the Enter/
√
button until the console displays “ENERGY SAVER OFF”.
5.
Press an up or down arrow button (
↑↓
). The screen will display “ENERGY SAVER ON”.
6.
Press and hold the Stop button to exit Switch Function mode.
7.
Press and hold the Stop button to exit Engineering mode.
Note: When the machine is in Energy Saver mode, you can press any button to wake up the console.
Cleaning the Console Screen
To clean the console screen, we recommend spraying a soft, lint-free, dry cloth with the screen cleaner
and gently wiping the console.
•
Avoid using products that contain ammonia and alcohol.
•
Do not use abrasive pads or paper towel, and do not spray the console directly, as liquid could
leak into the console and cause damage.
•
Monitor wipes may also be used.
FAQS
Does the heart rate strap that comes with the product need to be synced to
Bluetooth?
No, the Polar heart rate strap that comes with the console is a 5kHz transmitter. (The XR console does
not
have Bluetooth connectivity.)
Where can I learn more about Sprint 8?
Where can I learn more about the programs on my machine?
Please refer to the MXR19 Cardio Consoles Owner’s Manual for a complete description of the programs
available on your machine.
What is the workout time range?
The workout time range that you can set on the XR console is five-99 minutes.
