C
ONSOLE
I
NSTRUCTIONS
XR
11
Troubleshooting Guide
Getting Started
1.
Check to make sure not objects are nearby that will hinder movement of the equipment.
2.
Plug in the power cord and turn the equipment ON (Note: Some equipment does not have a
power switch).
Treadmills Only
3.
Stand on the side rails of the treadmills.
4.
Attach the safety key clip to part of your clothing make sure that it is secure and will not become
detached during operation.
5.
Insert the safety key into the safety key hole.
All Models
6.
Select the user (User 1-4) that you linked your xID to in your user profile.
7.
If prompted, enter your Passcode using the keypad and then press the Enter/
√
button.
8.
You are now logged into our xiD.
Option 1: Quick Start Up
Simply press the green GO/Pause button to begin working out. Time, distance, and calories will all count
up from zero. Or…
Option 2: Select a Program
1.
Use the arrow buttons (
↑↓
) to select a program and then press the Enter/
√
button.
2.
Set workout program information using the arrow buttons (
↑↓
) and press the Enter/
√
button
after each selection. Press the back button (
) by the number keypad to go back a step in the
setup.
3.
Press the Go/Pause button to begin workout.
Finishing Your Workout
When your workout is complete, the display will flash “WORKOUT COMPLETE” and beep. Your workout
information will stay displayed on the console for 30 seconds and then reset.
To Reset the Console
Hold the Stop button for three seconds.
Audio In/Out
You can play audio through the console speakers by connecting a device to the audio jack that is located
beneath the display. Plug your headphones into the audio jack and use them instead of the console
speakers.
