6
5
Mounting Screw
USB Port (For Data Transfer,
Firmware upgrade, Configuration
upgrade, downloading event logs)
USB Port for Data Card
COSEC DOOR- Bottom View
What Your Package Contains
Ÿ
COSEC DOOR Unit
Ÿ
Mounting Plate
Ÿ
Power Adapter 12V DC, 2 Amp
Ÿ
Four Screws M 7/30
Ÿ
Four Screw Grips
Ÿ
A Threaded Screw M 3x6
Ÿ
Power Supply Cable with DC jack
Ÿ
Ethernet Port Cable with RJ45 plug
Ÿ
Auxiliary Port Cable
Ÿ
Electromagnetic Lock Cable
Ÿ
Exit Switch Cable
Things You Will Need
Ÿ
A power hand drill
Ÿ
A wire stripper
Ÿ
A screw driver set
Ÿ
Insulation tape
Ÿ
Ÿ
Access to the COSEC Server
Ÿ
A Stand-alone Computer with a
Web Browser to change the
Network Settings of the Door
Controller.
Preparing for Installation
Step 1: Unpacking the DOOR
Ÿ
Unpack COSEC DOOR and check your package contents.
Ÿ
Select a Location. It must be a flat surface such as a wall, close to the access
point (door).
Ÿ
You can mount the COSEC DOOR directly to the wall or to an electrical box
recessed in the wall (recommended).
Ÿ
Recommended height from ground level: 4.5 to 5 feet.
Ÿ
CAUTION
Ÿ
Do not install the device:
Ÿ
In very hot, cold and humid environment temperatures
Ÿ
Near heating/air conditioning equipment
Ÿ
In dusty environment
Ÿ
In direct sunlight
Ÿ
Under direct light of incandescent or halogen lamps
Ÿ
Near infra-red radiation emitting equipment
Ÿ
Where ferromagnetic field or noise is induced
Ÿ
Near volatile inflammable materials or inflammable goods such as drapes
Ÿ
Where volatile gas and/or inflammable gas is created
