Matrix Telecom Proton 206 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 98

Matrix Telecom Proton 206 Скачать руководство пользователя страница 40

40

PROTON 206/308 V1 System Manual

Example:

To use call waiting facility of TELCO exchange from any station, follow the following steps:

How to program?

“Class Of Service (COS)”

for details on how to allow continued dialing on trunk to a station.

Please note that a station that is allowed the feature of trunk reservation can only use continued dialing.

Relevant Topic:

1.

“Class Of Service (COS)” 36

Conversation Recording

What’s this?

•

The PROTON 206/308 supports this feature if Matrix VMS viz. Cadence is interfaced with it.

•

This feature enables the station user to record the on-going conversation. The conversation is recorded in
the mailbox of the station user who uses this feature.

How to use it?

How to program?

No special programming is required for this feature. It is allowed to all the stations.

Important Point:

•

Conversation Recording is allowed only to stations having access to Conference.

Relevant Topic:

1.

“Voice Mail Integration” 83

Day and Night Modes

What’s this?

The PROTON 206/308 can be programmed to work differently during daytime (working hours) and nighttime
(non-working hours). This makes management of trunk calls efficient and avoid misuse of features and facilities.
Generally following features/facilities can be programmed differently for day and night times.
•

Class of Service

3

Dial

#.

Feature tone stopped.

4

Dial Desired Code.

1

Dial

Flash-#.

This informs the system to pass following code.

2

Dial

Flash-2.

Speech with second call.

3

Dial

Flash-#.

This informs the system to pass following code.

4

Dial

Flash-1.

Speech with first call.

5

Dial

Flash-#.

This informs the system to pass following code.

6

Dial

Flash-2.

Speech with second call.

Speech with other party.

Dial

Flash.

Station gets feature tone. The other party gets hold on music.

Dial

109.

The station gets RBT.
The PROTON-308 calls Cadence answers the call and conference is ensued
between caller, called party and the Cadence. The Cadence records the
conversation in the mailbox of the station user.

«
...
38
39
40
41
42
...
»

Содержание Proton 206



































































































Отзывы:

Нет отзывов