Matrix Switch Corporation MSC-DE1664 Скачать руководство пользователя

Страница: 55 / 60

MSC-DE1664 Product Manual

To use the tftp utility on Windows:

1. Copy the firmware image file to the Desktop.
2. Open a windows command prompt (

Start

→

Run

and type “

cmd

” followed by the ENTER key).

3. Change to the directory where the firmware image is with the command “cd Desktop” followed by the

ENTER key.

4. Type the following command to prepare the TFTP transfer (but don't hit ENTER yet):

tftp -i 192.168.2.59 put MSC-Carina-Firmware-x.x.x.hex

5. Make sure to replace 192.168.2.59 with the device's IP address if the update procedure being used

utilizes the device’s assigned IP and replace MSC-Carina-Firmware-x.x.x.hex with the correct version
number of the file.

6. Pressing ENTER will initiate the TFTP transfer. Make sure to perform the necessary actions to prepare

the system for an update, prior to attempting the transfer.

7. The TFTP program will indicate if the transfer was successful or not.

4.3.2 Mac OS X

Mac OS X comes with a tftp client. It is accessed from the Terminal application.

To use the tftp application on Mac OSX:

1. Copy the firmware file to somewhere easily accessible from the Terminal application, for example your

home directory at /Users/your_user_name/

2. Open a terminal: Applications -> Utility -> Terminal
3. Use 'cd' commands to change to the location of the firmware file, for example ‘

/Users/your_user_name/’

followed by the ENTER key.

4. Execute the tftp command with the IP address of the device (make sure to use the device's configured IP

if the update method being used utilizes the devices IP address):

tftp 192.168.2.59

5. Execute the following commands from within the tftp program, pressing ENTER after each line, except

the last one, to prepare the TFTP transfer:

binary

put MSC-Carina-Firmware-x.x.x.hex

6. Make sure to replace MSC-Carina-Firmware-x.x.x.hex with the correct version number of the file.
7. Pressing ENTER after the put command will initiate the TFTP transfer. Make sure to perform the

necessary actions to prepare the system for an update, prior to attempting the transfer.

8. The TFTP program will indicate if the transfer was successful or not.
9. If the transfer failed (timed out, etc), retry the

put

command or quit the application (type 'quit' and

ENTER) and start over from step 4.

4.3.3 Linux

The tftp application can easily be installed with your distributions package manager from a terminal, below are

Page 55 of 60

www.matrixswitch

corp.com

Содержание MSC-DE1664





























































Результаты поиска

Содержание MSC-DE1664

Отзывы:

Похожие инструкции для MSC-DE1664

Бренды по названию

Популярные бренды

Matrix Switch Corporation MSC-DE1664, Руководство по эксплуатации продукта

Результаты поиска

Содержание MSC-DE1664

Отзывы:

Похожие инструкции для MSC-DE1664

Бренды по названию

Популярные бренды